Beiträge von Rajdlos

    Im offering here complete Turbo engine with the power:
    341,3 WHP @ 6603RPM, 398 Nm @ 5642 RPM (wheel horse power)


    Now the engine is prepare for rebuild. Im really noob, I drove the car with open filling oil cap and the engine blow on all cylinders :((((( The ECU AEM is remapped, the engine drive perfect. I have dyno test result.


    So the engine must be new bored, honed and assembly.


    The works and parts what you should need:
    - new oversize pistons +0,5mm
    - new bearings (ACL)
    - repased turbocharger (just bearings)
    - new head gaskets
    - rebored the zylinders
    - rehoned the zylinders
    - assembly the engine



    The reason of sell, I bought GT-R R35 :)



    DYNO RESULTS:
    - 341,3 WHP @ 6603RPM, 398 Nm @ 5642 RPM (wheel horse power)
    - 403 HP @ 6603RPM, ? @ 5642 RPM (flywheel horse power)



    ENGINE:
    - Powered by RRR POWER, dyno test (254KW/341,3WHP @ 6603RPM, 398Nm @ 5642rpm, ? PSI)
    - 2.0 DOHC 16V VTEC I-4 F20C (stock 177KW/240PS @ 8300rpm, 208Nm @ 7500rpm) – MY 2003
    - REV HARD turbo kit stage 2


    Block:
    - AEBS T-sleeves engine work
    - CP forged pistons 9:1 w/ rings (bore: 88mm)
    - CARRILLO forged rods
    - ARP head studs
    - ARP rod bolts
    - ACL rods bearings
    - ACL main bearings
    - ACL thrust bearings
    - High volume race oil pump


    Head:
    - FERREA competion plus stainless steel valves
    - FERREA dual springs
    - FERREA titanium retainers
    - FERREA valve locators
    - COMETIC head gasket .040 / 1mm thick C4335-040


    Boost:
    - Turbo T3/T04E hybrid 0.60AR compressor, 0.63AR exhaust
    - REV HARD cast iron manifold
    - TIAL 35mm wastegate
    - VORTECH blow off valve (BOV)
    - AEM 3.5bar MAP Sensor kit 30-2130-50 w/ adapter on TB


    Fuel &ignition:
    - AEM EMS standalone 30-1052U w/ UEGO controller
    - NGK IRIDIUM BKR8IEX spark plugs (one step colder)
    - RC 750cc saturated injectors w/ clips and spacers
    - AEM fuel pressure regulator
    - WALBRO high volume intank fuel pump 255lh
    - SYTEC fuel pressure gauge on fuel rail


    Cooling:
    - PIPERCROSS PX700 air filter 3”
    - PIPERCROSS mini breather filter
    - KOYO aluminum radiator 53mm
    - KOYO radiator cap 1.3bar
    - SPOON thermostat (low temp)
    - MUGEN fan switch (low temp)
    - Custom carbon air box
    - LAMINOVA C43 365mm water oil cooler
    - MOCAL oil filter adapter with thermostat
    - P2R thermal throttle body gasket
    - P2R thermal intake manifold gasket
    - SPEARCO intercooler 27” x 6.5” x 3” (polished)
    - Chromed IC 2,25” aluminized mandrel bent piping
    - SAMCO intercooler silicone hoses (blue)
    - SAMCO radiator silicone hoses (blue)
    - SAMCO air filter hoses (blue)
    - SAMCO vacuum hoses (blue)
    - Big stainless steel T-clamps


    Others:
    - DEI turbo insulation cover
    - THERMOTEC express sleeve on wiring and hoses
    - THERMOTEC thermo sleeve on wiring and hoses
    - THERMOTEC micro louver air shield (between battery and headers)
    - POWER ENTERPRISE Mag Power II oil filter 04A (magnetic)
    - CUSCO oil catch tank
    - JS RACING magnetic bolt
    - Relocation oil kit w/ D-10 stainel steel lines
    - Stainless steel oil lines D-10 + fittings
    - R1 WURKS alternator light weight pulley
    - Krank vents
    - AEM A/F ratio gauge type wideband UEGO controller 30-4100
    - AEM boost display gauge 30-4406
    - AEM serial datastream gauge (19 channel) 30-4300
    - AEM oil pressure display gauge 30-4407
    - AEM oil temperature display gauge 30-4402
    - AEM water temperature display gauge 30-4402
    - AEM EGT sensor kit 30-2050
    - AEM air inlet temperature kit 30-2010
    - New OEM water oil pump
    - New OEM ignition coil packs
    - New OEM sensors
    - Blocked recuperation of exhaust Gates


    Engine styling:
    - Polished intake manifold
    - White color valve cover
    - Polished injectors cover
    - Aluminium oil cap


    EXHAUST:
    - Custom downpipe 3” stainless steel (polished)
    - ULTIMATE RACING 3” high-flow stainless steel catalytic converter
    - ULTIMATE RACING 3” stainless steel exhaust catback w/ AP2 OEM tips (polished)
    - THERMOTEC exhaust header wrap on downpipe w/ snap straps


    All parts costs really a lot of money. Just reamapped costed 1500 EUR on dyno.


    Everything is prepare beat up without problem 400PS. With other turbocharger is no problem 500PS and more.


    I imagine the price 10.000 EUR for all these parts. The NP was 3-4x higher.


    Or I can sell it on the parts. Just PM me.

    Auf diesen Beitrag antworten Zitatantwort auf diesen Beitrag erstellen Diesen Beitrag editieren/löschen Diesen Beitrag einem Moderator melden Zum Anfang der Seite springen


    Ich verkaufe karbon Hardtop Seibon style. Perfect Zustand ohne beschädigungen, nur 5500km gefahren. mit alle anbauteile. Fertig zu benutzung. Inklusive stand and original HONDA cover. Passt 100% auf dem Auto. Siehe Fotos.


    NP war sehr hoch (cca 4500 EUR mit montage kit).


    VP: 1900 EUR.


    +420 777271126
    hpp@wm.cz

    Ich verkaufe einen satz des Reifen + Felgen.


    4x SSR PROFESSOR SP-1 flat black w/ polished lip (front 8x18 ET49, rear 9,5x18 ET55)


    4x BF GOODRICH tires (front 225/40/18, rear 255/35/18)



    Reifen haben sehr guten Profil (6-7mm). Inkl. BLOX schwarze "Wheel nuts".


    Auf S2K passt perfect ohne Adapteren.


    NP war über 5000 EUR.


    Preis ist 1500 EUR.


    Martin
    +420 777271126
    hpp@wm.cz

    Ich verkaufe einen satz des Reifen + Felgen.


    4x SSR PROFESSOR SP-1 flat black w/ polished lip (front 8x18 ET49, rear 9,5x18 ET55)


    4x BF GOODRICH tires (front 225/40/18, rear 255/35/1cool


    http://www.highperformanceparts.cz/userf...ge/s2000_04.jpg
    http://www.highperformanceparts.cz/userf...ge/s2000_01.jpg


    Reifen haben sehr guten Profil (6-7mm). Inkl. BLOX schwarze "Wheel nuts".


    Auf S2K passt perfect ohne Adapteren.


    NP war über 5000 EUR.


    Preis ist 1800 EUR.


    Martin
    +420 777271126
    hpp@wm.cz

    - original HONDA cover mit logo S2000 - 115 EUR
    - original Mugen gas cap cover mit serien cap - 40 EUR (perfect condition).
    - VTEC solenoid cover black - 15 EUR
    - VISON battery holder blue - 15 EUR
    - seat back pocket - 20 EUR
    - carbon valve cover mit VTEC logo - 60 EUR
    - Mugen fan switch - 30 EUR
    - voll aluminium KOYO radiator 53mm - 200 EUR (kein billig schotch aus China)
    - Sport cat 3" für Turboumbauen, passt anstatt serie Kat. - 180 EUR
    - Sport clutch dual friction Centerforce 350 EUR (nur 5500km)
    - ACT Prolite flywheel - 300 EUR (nur 5500km)
    - gauge pod mit OEM pillar cover - 60 EUR
    - Spoon thermostat - 40 EUR
    - downpipe 63mm for T3/T4 turbo - 100 EUR
    - Krank vents - 80 EUR



    - AEM A/F ratio gauge type wideband UEGO controller 30-4100
    - AEM boost display gauge 30-4406
    - AEM serial datastream gauge (19 channel) 30-4300
    - AEM oil pressure display gauge 30-4407
    - AEM oil temperature display gauge 30-4402
    - AEM water temperature display gauge 30-4402
    - AEM EGT sensor kit 30-2050
    - AEM air inlet temperature kit 30-2010


    Fotos are no problem. Just write me.


    Shipping to all EU countries is possible :)


    Thanks
    Martin

    Verkaufe ich viele tuning Teilen von meinem S2k.


    - original Honda cover mit logo S2000 - 115 EUR
    - original Mugen gas cap cover mit serien cap - 40 EUR (perfect Zustand).
    - Seibon Wasserkühler plate - 100 EUR
    - Tein hood dampers - 100 EUR
    - VTEC solenoid cover schwarz - 15 EUR
    - VISON battery holder blue - 15 EUR
    - seat back pocket - 20 EUR
    - carbon valve cover mit VTEC logo - 60 EUR
    - water methanol kit mit befestigung kit in der Koffferaum auf S2K - 365 EUR.
    - Mugen fan switch - 30 EUR
    - voll aluminium KOYO radiator 53mm - 200 EUR (kein billig schotch aus China)
    - Sport cat 3" für Turboumbauen, passt anstatt serie Kat. - 180 EUR
    - Sport clutch dual friction Centerforce 365 EUR (nur 5500km)
    - ACT Prolite flywheel - 300 EUR (nur 5500km)


    Ich schicke gerne die Fotos auf Ihre email.


    +420 777271126
    hpp@wm.cz

    Ich verkaufe einen satz des Reifen + Felgen.


    4x SSR PROFESSOR SP-1 flat black w/ polished lip (front 8x18 ET49, rear 9,5x18 ET55)


    4x BF GOODRICH tires (front 225/40/18, rear 255/35/18)


    http://www.highperformancepart…rfiles/image/s2000_04.jpg
    http://www.highperformancepart…rfiles/image/s2000_01.jpg


    Reifen haben sehr guten Profil (6-7mm). Inkl. BLOX schwarze "Wheel nuts".


    Auf S2K passt perfect ohne Adapteren.


    NP war über 5000 EUR.


    Preis ist 1900 EUR.


    Martin
    +420 777271126
    hpp@wm.cz